Davies Craig, Mechanical Thermatic Fan Switch, 12V/24V, DC-0401
Buy now pay later,no extra cost!
Payments from $8.96 with
The Mechanical Thermal Switch can be used with our Thermatic Fans & Electric Water Pumps (EWP).
It senses the coolant temperature after it passes through the engine block prior to entering the radiator and is adjustable from 40° to 100°C (104° to 212°F). The Thermal Switch is mounted near the radiator and the stainless steel probe fitted inside the radiator hose using #0409). The Thermal Switch & relay kit enables a fan to operate both thermally and also when the air conditioning is running.
Specifications:
Lead Length 100cm
Temperature Range 40° to 100°C (104° to 212°F)
Sensor Probe Size Suites 6mm Olive
Kit Contents:
Thermal Switch 1
Rubber Seal Suits 1mm Capillary
Thermal Switch Knob 1
3M White Scotch lock Terminal 1
Instructions 1
Should you not want to squeeze the probe of the Mechanical Thermatic® Switch between the radiator inlet and radiator hose, or the radiator fins, we recommend you look at part number 0409 or 0400 (Sold Separately)
Should you not want to squeeze the probe of the Mechanical Thermatic® Switch between the radiator inlet and radiator hose, or the radiator fins, we recommend you look at part number 0409 or 0400 (Sold Separately)
The #0409 is a simple, economical Adaptor Kit allows easy fitting directly into the top radiator hose. Just fit the probe into the compression fitting, remove about 17mm (2/3”) of radiator hose, fit the adaptor between each hose and secure the hose clamps. The kit comes complete, as shown, for a watertight and effective probe installation. Extra rubber sleeves are supplied to enable fitment to radiator hose sizes from 32mm to 40mm (1¼” to 1½”) diameter.
Suits all temperature sensors with either a 5mm (3/16”) or a 6mm (1/4” outside diameter and temperature gauge senders with 6mm (1/4”) NPT thread. Note: This is an accessory for use with #0401, #0404, #0444 and
#0455 Thermatic® Switches.
Should you need to account for Air Conditioning, we recommend the Mechanical Thermatic® Switch(12V & 24V) plus Relay for Air Conditioning, Part #0404
For 24 Volt Application:
Kit sold in 12 volt configuration, for 24 volt application, you will need to purchase 24 volt relay for each electric fan.
