FuelTech

ECU electronic injection system in automotive vehicles. The FT550 is an engine fuel control and monitoring system from FuelTech: electronic fuel in...

ECU electronic injection system in automotive vehicles. The FT450 is a FuelTech engine monitoring and control system: electronic injection, integra...

Bosch LSU4.2 WB-O2 sensor compatible with the following FuelTech products: NanoPRO WB-O2 Nano Alcohol O2 WB-O2 Datalogger WB-O2 Slim Sensor life dr...

Unterminated harness for FT450/550 A connector - 10 foot or 20 foot length.

Perfect mounting solution for your FT450 & FT550 ECU.Modifications are required to fit specific vehicle.Approximate Dimensions: 18" x 12"

Unterminated harness for FT550: A & B Harnesses - Both of these harnesses are required. B Harness - Ordered by itself only if upgrading from FT...

The Yamaha 1800 SVHO/SHO/HO (2008 - 2017) adapter HARNESS, designed by FuelTech, is the perfect solution for FuelTech ECU installation using the PW...

4x WB-O2 Nano Harness. Install 4 Nanos with ease!

Typically used for precise fuel pressure monitoring on carburetor applications. Multiple sensors can be used for multiple stages of wet nitrous fue...

High quality stainless steel temperature sensor. These sensors are known for their accuracy and can be used in harsh environments. Most commonly us...

Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Can not be ...

NTK WB-O2 sensor compatible with our Alcohol O2 conditioner. Designed for high horsepower alcohol combinations. High accuracy and low AFR readings....

The FuelTech Backpressure Dampening Canister is a great addition to any turbocharged engine. Measuring the exhaust back pressure is vital data requ...

Made for BBC 1" Raised Cam with a belt drive.Must use with Hall Effect Cam Sync Sensor.

Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Recommended ...

Use with FT450 / FT500LITE / FT500 / FT550 / FT550LITE / FT600 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT ...

Replacement solenoid valve for BoostController2.

The FuelTech Cylinder Head Temperature Thermocouple offers faster and more accurate temperature reading for engine head temperature.The ring tip gi...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Screw in bung 1/8 NPT thread for 1/4 inches thermocoupler installation.

Ethanol content is a basis for many functions in an engine. The ethanol content as a variable can be the difference between having optimised igniti...

This connector kit is compatible with the following products: FT500LITE/500 Auxiliary FT400 Auxiliary

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...

This connector kit is compatible with the following products: FT500LITE/500 Main FT400 Main FT350 FT300 FT250 GearController BoostController2 PRO24...

Add these injector boots to your custom harness to protect the wiring and for a clean installation.*Injector connector not included.

CAN B Connector Kit for FT550/600.

Use this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation.Kit Includes: EV1...

Use this kit when building a custom harness while using injectors with EV6/EV14 connectors.Kit Includes: EV6/EV14 injector connector, (2) terminals...

Flex Fuel Sensor Connector Kit

Fits FT450/550/600 ECU mating connectors

The FT450 Connector Kit is recommended for those who have upgraded to the FT450 ECU and want to modify their existing harness for the new FT450 con...

The FT550 Connector Kit is recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 con...

The FT600 Connector Kit is recommended for those who have upgraded to the FT600 ECU and want to modify their existing harness for the new FT600 con...

Molex 4 pin terminating resistor. Plug and play with FuelTech harness connections for CAN A devices.