aFe Power DFS780 Fuel Pump (Boost Activated) Ford Diesel Trucks 03-07 V8-6.0L (td)
Buy now pay later,no extra cost!
Payments from $201.02 with
Built-in Bypass For Stock Fuel System:
Allows vehicle to run on stock fuel pump under light loads, reducing wear & tear on both the DFS780 and the stock high-pressure pump.
Clear High-Impact Polycarbonate Sight Glass:
Allows visual inspection of fuel.
Helical Bronze Spur Gears:
Bronze gears more forgiving of contaminants than steel gears. The Helical spur gear design runs quieter than straight cut gears.
Billet 6061-T6 Aluminum Manifold:
Eliminates porosity concerns with cast aluminum.
Marine Grade" Motor:
Protected against dust intrusion and powerful water jets.
Plug & Play Installation:
Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required. Vehicle can easily be returned to stock.
Boost Activated Pump Engagement:
Supplied preset boost switch activates pump only under load, reducing wear & tear on both the DFS780 and the stock lift pump.
PEEK Bearing Wear Surfaces:
The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear.
Contoured CNC Machining Of Manifold Passages:
Enhances flow through the manifold to reduce pressure drop due to flow restrictions.
Direct Bolt-on Steel Mounting Bracket:
Heavy duty bracket mounts to the frame and utilizes existing hole to secure.
Fuel Pressure Gauge Port:
1/8” NPT port allows customer to attach an external pressure gauge to monitor fuel pressure.
O.E Quality Viton Seals:
Compatible with diesel and biodiesel fuels.
Note: This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Features:
- Clear high-impact polycarbonate sight glass for visual inspection of fuel
- Helical spur gears runs quieter than straight cut gears
- "Marine Grade" motor protects against dust and water
- 187 GPH @ 8-10 psi Flow Rating
- Contoured CNC manifold enhances flow
- Fuel pressure gauge port
- O.E. quality Viton Seals
- Typical install is 2 hours
- Built in the U.S.A.
Vehicle Applications:
| Year | Make | Model | SubModel | Engine | Fuel |
| 2003-2007 | Ford | F-250 | Power Stroke Turbo Diesel | V8 6.0L | Diesel |
| 2003-2007 | Ford | F-350 | Power Stroke Turbo Diesel | V8 6.0L | Diesel |
