FuelTech

TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-1500 psi Thread size: 1/8" NPT Connector Pinout: A - Ground B - 5V C - Signal SPECSPerfo...

Typically used for precise fuel pressure monitoring on carburetor applications. Multiple sensors can be used for multiple stages of wet nitrous fue...

Typically used to monitor fuel, oil, and wastegate pressure.TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-300 psi Thread size: 1/8" NP...

Typically used for wheelie bar load cells.TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-3000 psi Thread size: 1/8" NPT Connector Pinou...

High quality stainless steel temperature sensor. These sensors are known for their accuracy and can be used in harsh environments. Most commonly us...

Typically used to monitor transmission, converter, clutch, and mechanical fuel pressure. Output: 0.5-4.5V Supply: 5V Range: 0-500 psi Thread size: ...

This connector kit is compatible with the following products: FT500LITE/500 Auxiliary FT400 Auxiliary

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...

This connector kit is compatible with the following products: FT500LITE/500 Main FT400 Main FT350 FT300 FT250 GearController BoostController2 PRO24...

Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Can not be ...

Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...

4x WB-O2 Nano Harness. Install 4 Nanos with ease!

Add these injector boots to your custom harness to protect the wiring and for a clean installation.*Injector connector not included.

NTK WB-O2 sensor compatible with our Alcohol O2 conditioner. Designed for high horsepower alcohol combinations. High accuracy and low AFR readings....

The FuelTech Backpressure Dampening Canister is a great addition to any turbocharged engine. Measuring the exhaust back pressure is vital data requ...

Made for BBC 1" Raised Cam with a belt drive.Must use with Hall Effect Cam Sync Sensor.

Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Recommended ...

Use with FT450 / FT500LITE / FT500 / FT550 / FT550LITE / FT600 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT ...

Replacement solenoid valve for BoostController2.

Bosch LSU4.2 WB-O2 sensor compatible with the following FuelTech products: NanoPRO WB-O2 Nano Alcohol O2 WB-O2 Datalogger WB-O2 Slim Sensor life dr...

CAN B Connector Kit for FT550/600.

Molex 4 pin terminating resistor. Plug and play with FuelTech harness connections for CAN A devices.

Bracket kit designed to mount (4) FuelTech CDI Racing Ignition Coils Made from lightweight billet aluminum, only 13.1 oz Includes (4) 1/4” socket ...

The FuelTech Cylinder Head Temperature Thermocouple offers faster and more accurate temperature reading for engine head temperature.The ring tip gi...

Perfect mounting solution for your FT350/FT400/FT500 ECU.Modifications are required to fit specific vehicle.Approximate Dimensions: 18" x 12"

Perfect mounting solution for your FT450 & FT550 ECU.Modifications are required to fit specific vehicle.Approximate Dimensions: 18" x 12"

Perfect mounting solution for your FT600 ECU.Modifications are required to fit specific vehicle. Panels do not come trimmed down or with a carbon f...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accurac...

Davis Technologies sensors are extremely high quality Hall Effect type, capable of measuring speeds up to 15 KHz. These sensors are triggered by fe...

Compatible with the following ECUs:FT600 / FT550 / FT500 / FT500LITE / FT450

Screw in bung 1/8 NPT thread for 1/4 inches thermocoupler installation.

4 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's.FEATURES The FuelTech EGT-4 CAN is compatible with any type...

Use this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation.Kit Includes: EV1...

Use this kit when building a custom harness while using injectors with EV6/EV14 connectors.Kit Includes: EV6/EV14 injector connector, (2) terminals...

This sensor is needed if you are exceeding the limit of your internal map sensor on your ECU or want to run an external map sensor on your setup. R...

Flex Fuel Sensor Connector Kit