Wastegates

GT30R/GTX30R internal wastegated TiAL turbine housing, .62 A/R with v-band inlet and outlet. Specifications 33% Turbocharger weight reduction vs i...

Actuator for internal wastegate assembly. Special lower pressure (7 psi) version of the actuator similiar to the one found on the GT28RS/GT2871R. H...

Internal Wastegate Bracket will fit any T25, T3, T4 Style compressor housing. Has been redesigned many times to make it truly universal. Will also ...

Mazdaspeed externally wastegated turbine housing for Garrett GT and GTX series turbochargers; and flanged for TiAL MVS wastegate. The turbine housi...

MVS 38mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded 38 (MVS) wastegate. Built from heavy duty stainless flanges and thick-wall ...

Low profile version of the ATP-FLS-130 - MVS 38mm wastegate elbow. 100% 304 stainless. Flanged for Tial V-Banded 38mm (MVS) wastegate. Allows for f...

Replacement Wastegate Actuator (approx. 18 psi base pressure), for Evo X kit GTX3576R running the Garrett 4" inlet comp housing. This fitment is di...

Retaining Clip to retain rod end eyelet to the swingvalve on turbine housing. 6.5mm eyelet diameter for 6mm pin diameter on the crankarmApplicable ...

Stainless steel gasket for Ultimate Internal Wastegate Module Product Code: ATP-WGT-023.

Adapter flange for 38mm or deltagate style wastegate. It rotates the wastegate placement 90 degrees, and it comes with countersunk mounting points ...

(1)Steel external wastegate blockoff flange. Designed for Turbonetics Deltagate or Tial 35/38mm external wastegate. Perfect for modifying a turbo m...

Subaru WRX STI RHD (right hand drive chassis) External Wastegate Adapter for ATP Turbo stock location upgrade Garrett turbochargers. Compatible wi...

"High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. 17-7 PH Stain...

  NEW! Tial External Wastegate, 44mm - MVR Vband connections. Direct replacements and takes same flanges as Tial V44. More compact top section wit...

Replacement Bolt and Nut for TiAL wastegate V-band clamp. V-band clamp not included.PRODUCT CONTENTS: (1 Unit) Bolt (1 Unit) Nut

Garrett Turbine housing, Standard T25 Flange internal wastegate .64a/r. Turbine housing from various GT25 turbos models such as GT2554R and GT2560R...

Garrett standard rotation externally wastegated G25 G series turbine housing with a .92 A/R v-band entry/exit. Garrett P/N: 740902-0068

Turbine Housing, newer style for GT Turbo with T3 internal wastegated with built in swingvalve, with 5 bolt discharge. Use flange: ATP-FLS-075 for ...

Wastegate, Ultimate internal swingvalve, 3" Vband, bolts up to T3 5 bolt (ford style) exhaust housing, super higher flowing design for high HP such...

Wastegate, Ultimate internal swingvalve, 3" Vband, bolts up to T3 5 bolt (ford style) exhaust housing, super higher flowing design for high HP such...

Wastegate actuator. Stock unit found on GT28R with 6-7 PSI rating.

Wastegate, Actuator, higher pressure replacement for GT28RS stock unit, 12 to 14 psi with adjustable rod end

Universal fit wastegate actuator, 6 PSI. The two bolt pattern is compatible with any of the brackets listed on this site in the wastegate section. ...

Staight rod vacuum actuated wastegate. Common replacement for applications such as OE VW Turbo Diesel. Stock replacement.

(1)Adapter, for installing V-banded V38mm (MVS) Wastegate onto a manifold flanged (or other location flanged) for 2 bolt, F38mm wastegate. for 35mm...

Bracket , Wastegate, special Modified Garrett bracket to allow Garrett 2 bolt style style actuator to be mounted to GT28RS via 2 of the 6 bolt on t...

Wastegate bracket. Fits T04B frame compressor housings that are standard on GT28/GTX28 and most actuators with the universal 2 bolt bolt spacing. G...

Tial 44mm / Tial MVR Wastegate Inlet Clamp

Tial 44mm / Tial MVR Wastegate Outlet Clamp

Tial V-banded 38mm MVS (V38) Wastegate Inlet Clamp

Tial V-banded 38mm MVS (V38) Wastegate Outlet Clamp

Wastegate, Actuator, HIGH PRESSURE 1.5 BAR unit that can be used on all ATP GT/GTX Subaru Bolt-On Turbos in order to raise the base boost pressure ...

Wastegate, Actuator, STANDARD 1 BAR unit used on all ATP Garrett GT/GTX Subaru Bolt-On Turbos, 12 to 14 psi base boost pressure with adjustable rod...

Garrett Wastegate, Actuator, stock unit found on S15 SR20DET T28 Ball Bearing with 6-7 psi rating. The actuator comes integrated with a fixed 2 bol...

GT30R/GTX30R watercooled internal wastegated TiAL turbine housing, .62 A/R with v-band inlet and outlet. Specifications 33% Turbocharger weight re...

BLOX Racing offers a full line of DIY performance parts. Wastegate flange gaskets are made from 1mm thick, single layer stainless steel and fit 38m...

BLOX Racing offers a full line of DIY performance parts. Wastegate flanges are CNC-machined from 1018 mild steel and are available for 38mm TiAL or...

To further support the ease of installation and use, CorkSport has developed a direct fit Dumptube Kit for use with the DISI MZR Exhaust Manifold. ...

Forge Motorsport's External Wastegate (FMWG001) can be precisely tailored to each individual application with the use of eight different spring con...

This is the complete spring and shim kit for our 44mm wastegate FMWCW1. Consisting of 4 Eibach springs and 8 precision shims allowing you to fine...

These are the individual springs and shims sold in our FMWCSPK kit for our 44mm wastegate FMWCW1. Please use the table below to find the part num...

Suits Wastegates 38 (7003) & 44 (7002) 7 psi outer spring

Suits Wastegates 38 (7003) & 44 (7002) 7 psi middle spring

The EX38 features a 38mm valve and comes standard with a 10psi spring. Additional springs are also available - by using various combinations of 5p...

Suits Wastegates 38 (7003) & 44 (7002) 5 psi spring