Davies Craig, V2 Digital Electric Water Pump & Fan Controller Kit, DC-8002
Buy now pay later,no extra cost!
Payments from $29.23 with
For optimum control of Davies, Craig 12 Volt and 24 Volt Electric Water Pumps.
Suits EWP®80, EWP®115, EWP®130, EWP®150, Thermatic® / Electric Fans and billeted style Electric Water Pumps.
The updated controller offers enhanced rounded appearance, slimmer and the seven-pin plug is now safely tucked away, out of sight at the base of the Controller.
The EWP®/Fan Digital Controller has two specific functions:
Will manage the operation of the EWP® by varying the speed of the pump in response to the coolant temperature & also manage control of your electric engine fan.
The Controller has a push-button to lock in any temperature from 40°C (104°F) to 110°C (230°F). It’s recommended you set/target the Controller to closely match your engine’s existing thermostat temperature.
The Digital Controller will operate the engine’s electric fan automatically once the engine has reached +3°C (+5.4°F) above the targeted / set temperature. Another significant benefit is that the Controller allows the EWP® & Fan to run on after ignition shutdown for either 3 minutes or -10°C (-14°F) of set set / target temperature to eliminate heat soak.
Kit Contents:
- EWP® Digital Controller Assembly 1
- Wiring Harness (includes 10AMP fuse) 1
- Temp Sensor 1/4 NPT 1
- In-Line Adaptor (35mm ends - hose size fitting) 1
- Hose Clamps 2
- Ring Terminal 1
- Rubber Sleeves 3mm 2
- Mounting Options: Velcro, Nylon Plate, Bracket 3
- Instructions 1
Specifications:
- Voltage range 12V DC to 29V DC
- Display LCD size 64.6mm (2.54”) x 55.6mm (2.19”)
- Maximum current 12Amps
Warning alarm:
- High & low Temp, Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
- Targeted (set) temperatures: 40°C (104°F) to 110°C (230°F)
- Memory Set & targeted temperature
- Fan cut-in temp. 3°C (5.4°F) above the targeted (set) temperature
- Controller type PCB with micro-processor
- Sensor type Thermister in housing
- Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
Indicators:
Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Weight 135 grams
Dimensions:
- Length = 98mm (3.8")
- Width = 95mm (3.7")
- Depth = 25mm (1”)
