Mishimoto Baffled Oil Catch Can, Fits Dodge Ram 1500 5.7l 2019+
Buy now pay later,no extra cost!
Payments from $52.01 with
The 5.7L Hemi V8 engine found in the 2019+ Dodge Ram 1500 is an icon of American ingenuity, but even icons have their faults. As we saw during development of our 2009–2018 Dodge Ram 1500 5.7L V8 baffled oil catch can kit, the 5.7L Hemi produces a huge amount of blow-by. That blow-by contains oil, fuel, and water vapors that coat your engine’s intake components and degrade the quality of the fuel it burns. Over time, the effects of blow-by can grow to the point of causing misfires and destroying sensors.
Mishimoto has a solution to save your 2019+ Dodge Ram 1500 5.7L Hemi from the effects of blow-by, just like with its predecessor. Our direct-fit baffled oil catch can kit redirects blow-by away from your intake and into our catch can where harmful oil, fuel, and water vapors are filtered out. Inside our catch can a set of air turbulators help disrupt and slow incoming crankcase gases. Then, a perforated baffle acts as a condensing point for vapors and prevents any liquid from exiting the can. Before the crankcase gases are returned to the intake, our 50-micron sintered bronze filter removes any remaining particles to ensure that only clean air returns to your intake. All of this helps your engine run longer, cleaner, and more efficiently.
Like our other direct-fit oil catch can kits, installation of our 2019+ Dodge Ram 1500 5.7L catch can requires no cutting or drilling and fits with your stock engine bay components. Simply attach the can to the supplied direct-fit bracket, bolt it to the truck and route the direct-fit lines to the stock PCV system. Installation takes less than an hour, so your 5.7L Hemi will be running clean in no time.
This 2019+ Dodge Ram 1500 5.7L Hemi oil catch can kit is backed by our Mishimoto Lifetime Warranty, so you never have to worry about blow-by in your 5.7L Hemi’s intake for as long as you own it.
Features:
- Direct fit for the 2019+ Dodge Ram 1500 5.7L Hemi V8*
- Single can mounted in line with the PCV system separates harmful oil, fuel, and water vapor from crankcase gases
- Large 7.5 oz capacity for extended service intervals
- Installs in under 1 hour
- Includes direct-fit hoses for easy install
- Helps maintain proper octane levels to reduce potential detonation
- Internal air diverter increases air turbulence to improve oil separation
- Filter and can are fully serviceable
- Mishimoto Lifetime Warranty
Includes:
- (1) 7.5 oz Aluminum Baffled Oil Catch Can
- (1) Application-Specific Mounting Bracket
- (2) Direct-Fit Oil-Resistant Hoses
- (2) CNC-Machined Aluminum 1/2" Barbed Fittings
- (4) Worm Gear Clamps
- Mounting Hardware
- Mishimoto Lifetime Warranty
Notes:
After installation, Mishimoto recommends checking the contents of the baffled catch cans every 500 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
Vehicle:
| ENGINE CODES | 5.7L V8 Hemi |
| FITS | RAM 1500 w/ 5.7L V8, 2019+ * 2019 "Classic" trucks require our 2009-2018 Dodge Ram 1500 5.7L Baffled Oil Catch Can found here. |
Specifications:
| INLET | 1/2" |
| OUTLET | 1/2" |
| DRAIN PLUG THREAD SIZE | 3/8" NPT |
| CAPACITY | 7.5 oz |
| MATERIAL | 6061 Aluminum |
| INSTALL TORQUE SPECS | 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M). |
| BAFFLED | True |
