Click or scroll to zoom
Tap or pinch to zoom
STM Tuned 3.5" Titanium SD Intake Burned Blue (No MAF) for Evo 8/9
by STM Tuned
$1,004.24 NZD
SKU STM-EVO89-INTK-TiB-35-SD-25
Buy now pay later,no extra cost!
Payments from $100.42 with
Enjoy now. Pay Later. Interest free. Learn More
The STM 3.5" Titanium SD Intake was designed specifically for Evo 8/9 bolt-on FP Turbos such as the Red, Black, Zero and Zephyr (3.25" inlets) but can also be used with a stock turbo by selecting the 2.5" coupler, or any 3" aftermarket bolt-on turbo. Features a 3.5" tig welded, pie-cut, titanium intake pipe, 9" long K&N filter and a high-quality silicone reducing coupler to match your turbo.
Features:
This intake pipe does not work with the MAF, and is used for speed density only.
ACD:
The STM 3.5" Intake Pipe will fit both Evo 8 and 9 and will clear the ACD reservoir.
Burned Titanium:
Each intake is torch burned for a one-of-a-kind finish to show off blue, pink, gold and purple in your engine bay!
What's the Bung For?
Adding the -10AN bung on the underside of the pipe is allows you to use the STM Sealed Catch Can which vents from the can to the intake pipe.
Install Notes:
If you're not using a catch can, we would suggest to vent your crankcase via the valve cover. This is the K&N Breather Filter you'll need: 62-2470
Features:
- 3.5" Tig-Welded Pie Cut Titanium
- Burned Blue, Gold, Pink and Purple
- Huge 9" K&N Air Filter
- Fits ACD & Non-ACD
- Optional -10AN Fitting for STM Sealed Catch Can
- For Speed Density
- 2003-2006 Evolution VIII IX
- Designed for Bolt-On Turbos
- For Speed Density Only
- Does not work with the MAF
- Fits both ACD and NON-ACD models.
- Can be used with the STM Sealed Catch Can (with -10AN Bung)
This intake pipe does not work with the MAF, and is used for speed density only.
ACD:
The STM 3.5" Intake Pipe will fit both Evo 8 and 9 and will clear the ACD reservoir.
Burned Titanium:
Each intake is torch burned for a one-of-a-kind finish to show off blue, pink, gold and purple in your engine bay!
What's the Bung For?
Adding the -10AN bung on the underside of the pipe is allows you to use the STM Sealed Catch Can which vents from the can to the intake pipe.
Install Notes:
If you're not using a catch can, we would suggest to vent your crankcase via the valve cover. This is the K&N Breather Filter you'll need: 62-2470
STM Products are made in the USA!
Lifetime Warranty on STM Parts to the original purchaser against manufacturing defects.
Fabrication Time:
This intake pipe is hand-made just for you! Please allow 2-4 weeks of build time before shipment.
Options:
- -10AN Bung
- Coupler Size for Turbo
Includes:
- (1) K&N Air Filter (RE-0920)
- (1) STM 3.5" Aluminum Pipe
- (1) STM Reducing Coupler
- (2) Worm Clamps for Coupler
