TracTuff RBB/RBC Swirl Pot & Overflow
Buy now pay later,no extra cost!
Payments from $152.04 with
A version of my RBB/RBC swirl pot with an integrated overflow; eliminates the need to route an overflow hose to the core support or frame rail, where an overflow might usually be found. Due to the weight of this unit, mixed with heat and vibration... I do NOT recommend this product for RACE CARS. Also, the original heater port on this flange cannot be used due to the configuration, a hose barb or AN bung can be added to the exposed side of the swirl tank (on request) to do the same job.
The domestic cap bung has a 1/8" NPT port and the import version has a 1/16" NPT for connection to an overflow. The domestic version uses any early model (late 70's Chevy C10 Pickup w/ 454) cap and the import version uses early model Honda (88'-91' Civic/ CRX and 90'-93' Integra) cap.
NOTE: Made to Order - Contact for ETA - If you are interested in a specific design that varies from this, please email us at sales@tractuff.com. If you have questions related to the configuration options... PLEASE visit the FAQ page. The intake cam sensor must be swapped to the version that points up in order to clear the tank. If using AN lines we also recommend designing the upper radiator hose so that there is droop/ give so the engines movement and does not push/ pull on the radiator and fatigue any parts. The billet neck has a 1/2" NPT heater port but CANNOT be used in this configuration... a plug is pre-installed prior to completion. The tank is welded so that it sits level when bolted to an engine leaned back 15° (exhaust side) for the traditional option and leaned forward 8° (intake side) for the gangster lean mount option.
Additional Product Options
- Outlet Position
- Neck Sensor Port
- Radiator Cap
- Overflow Tank Port Option
