Davies Craig, EWP80 Kit - 12V 80LPM/21GPM Remote Electric Water Pump, Suit 2.0L Engine, DC-8005
Buy now pay later,no extra cost!
Payments from $21.33 with
The revolutionary, Australian designed, EWP pump is made from anti-corrosive, lightweight, glass-filled nylon & incorporates a carbon mechanical face seal for added reliability.
The EWP®80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP®80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.
The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque.
DC-8005 / EWP80 Kit Contents:
- EWP80 Pump 12V 1
- EWP80 Hardware Bag 1
- EWP Straight Adatpor 35mm 1
- EWP L-Adaptors 35mm 1
- EWP Adaptor O-Ring 2
- Hose Clamp 2
- EWP Basic Pump Loom 1
- EWP Universal Instructions 1
- Rubber Sleeve 3mm (Increase hose fitting size to 38mm)
For larger hose size, you will need 6mm sleeves (Part #18511) which will increase adaptor to fit hose size 41~42mm *not in kit
Specifications:
- Voltage 12 Volt Pump
- Operating voltage 3V DC to 15V DC
- Maximum current 7.5A @ 13V
- Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC
- Operating temp. -40° to 130°C (-40° to 266°F)
- Pump design Clockwise centrifugal with volute chamber
- Pump weight 900 grams (2.0 lb)
- Pump material Nylon 66, 30% glass-filled
- Burst pressure 350 kPa (50 psi)
- Seal Ceramic face seal
- Self Priming No, none of our pumps are self-priming
- Fits hose sizes 32mm to 51mm (1⅜” to 2”)
Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or buy combo #8907) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life.
