Click or scroll to zoom
Tap or pinch to zoom
Precision Works K-Swap LHS Swap Radiator Hose Kit With Fan Bung K24 EG / DC / EK
$212.73 NZD
SKU PW-HOSE-K-SWAP-BUNG
Buy now pay later,no extra cost!
Payments from $21.27 with
Enjoy now. Pay Later. Interest free. Learn More
Our radiator hoses are made from strong, heat resistant, high grade, 4-ply reinforced silicone. The inner layers of silicone are red and the outer layer is finished in black. These will fit with all PRB/ PRC, RBC/RRC and Skunk2 intake manifolds. No more installation headaches or messing around with universal hoses.
Our lower hose has been designed with a built in port to hold an optional bung for an OEM rad fan switch. This optional port was added so that you no longer need to cut into the hose to install a bulky and ugly aluminum adapter. If you don't plan to use a fan switch in the hose location, the included plug will seal the port easily. The plug can also be drilled and tapped for aux. coolant sensors if desired.
Note that we still recommend installing the single wire coolant temp gauge sensor in the upper rad hose location or in coolant housing.
These are designed to work with most 92-00 half size radiators that are relocated to the driver side of the engine bay.
Note: Requires K20 thermostat housing or Swivel Thermostat PW-KS-SW-TH (Thermostat must be pointing down)
Our lower hose has been designed with a built in port to hold an optional bung for an OEM rad fan switch. This optional port was added so that you no longer need to cut into the hose to install a bulky and ugly aluminum adapter. If you don't plan to use a fan switch in the hose location, the included plug will seal the port easily. The plug can also be drilled and tapped for aux. coolant sensors if desired.
Note that we still recommend installing the single wire coolant temp gauge sensor in the upper rad hose location or in coolant housing.
These are designed to work with most 92-00 half size radiators that are relocated to the driver side of the engine bay.
Note: Requires K20 thermostat housing or Swivel Thermostat PW-KS-SW-TH (Thermostat must be pointing down)
